Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:hardware:red:assembling [2018/08/18 06:14]
gerbold
en:hardware:red:assembling [2018/08/26 05:32] (current)
gerbold [Parts with a high mounting height]
Line 41: Line 41:
   * On the Buzzer there is sticking a sign marking the positive pin.   * On the Buzzer there is sticking a sign marking the positive pin.
   * The IN-1 and IN-2 modular RJ45 jacks should be mounted after you already know that the GPS is working properly.   * The IN-1 and IN-2 modular RJ45 jacks should be mounted after you already know that the GPS is working properly.
 +
 +===== How to continue from here =====
 +
 +  * Assemble the [[en:​hardware:​red:​controller|controller]]
 +  * Assemble the [[en:​hardware:​red:​amplifier|amlifiers]],​ namely [[en:​hardware:​red:​amplifier:​amplifier12|amplifier 12]], [[en:​hardware:​red:​amplifier:​amplifier13|amplifier 13]] and [[en:​hardware:​red:​amplifier:​amplifier14| pre-amplifier 14]].
 +